{"id":3170,"date":"2026-11-05T11:13:39","date_gmt":"2026-11-05T10:13:39","guid":{"rendered":"https:\/\/www.enaspol.com\/?p=3170"},"modified":"2026-11-12T20:05:38","modified_gmt":"2026-11-12T19:05:38","slug":"pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production","status":"publish","type":"post","link":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/","title":{"rendered":"PNS or PCE? How to choose a superplasticizer for precast concrete production"},"content":{"rendered":"<p>A concrete mix can behave differently as it is placed in a mould than it did when it left the mixer. If changing admixture leads to inconsistent flow or early strength, adjusting the dose alone is unlikely to solve the problem.<\/p>\n<p>The choice between PNS and PCE should therefore depend not on which technology is newer, but on the demands of your production cycle.<\/p>\n<h2>What is the difference between PNS and PCE?<\/h2>\n<p>A mix\u2019s flow and workability retention depend on how the admixture disperses cement particles:<\/p>\n<ul>\n<li><strong>PNS (polynaphthalene sulfonate)<\/strong> works through <strong>electrostatic repulsion<\/strong>. It gives cement particles a negative charge, causing them to repel one another rather than trap mixing water between them. More of that water remains available to improve flow.<\/li>\n<li><strong>PCE (polycarboxylate ethers)<\/strong> also use <strong>steric hindrance<\/strong>. Their polymer side chains keep particles apart, rather like the bristles of a brush. This is highly effective, but PCE performance can be more sensitive to the cement used and to clay in the aggregates.<\/li>\n<\/ul>\n<h2>When is PCE the better choice?<\/h2>\n<p>PCEs can deliver greater water reduction and better workability retention. These advantages are particularly valuable for:<\/p>\n<ul>\n<li><strong>ready-mixed concrete<\/strong> with a longer journey to site,<\/li>\n<li><strong>self-compacting concrete (SCC)<\/strong> that must fill a mould without vibration,<\/li>\n<li><strong>high-strength concrete<\/strong> with a low water\u2013cement ratio.<\/li>\n<\/ul>\n<p>Precast production is different. Concrete usually moves from mixer to mould quickly, so extended workability retention may offer little benefit. Batch-to-batch consistency, predictable behaviour and timely demoulding can matter more.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-3190 size-large\" src=\"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/nahled-b-kuzel-16x9-1-1024x576.jpg\" alt=\"Fresh concrete consistency test using a slump cone\" width=\"1024\" height=\"576\" srcset=\"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/nahled-b-kuzel-16x9-1-1024x576.jpg 1024w, https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/nahled-b-kuzel-16x9-1-300x169.jpg 300w\" sizes=\"auto, (max-width:767px) 767px, (max-width:1024px) 100vw, 1024px\" \/><\/p>\n<h2>When is PNS worth considering for precast production?<\/h2>\n<p>Where the time between mixing and casting is short, PNS may be more tolerant of variation in raw materials.<\/p>\n<h3>Flow varies after a change of cement<\/h3>\n<p>PCE performance can be more sensitive to cement type than PNS performance. For a precast plant, PNS may therefore mean fewer dose adjustments when cement deliveries change.<\/p>\n<h3>Clay in the aggregate reduces admixture performance<\/h3>\n<p>Clay minerals in aggregates can bind some of the PCE polymer, reducing its effectiveness. PNS is more resistant to this effect and may help maintain more consistent flow when aggregate quality varies.<\/p>\n<h3>Units gain strength slowly in winter<\/h3>\n<p>Some conventional PCEs can slow cement hydration, making early strength harder to achieve in cold conditions. Specialist PCEs designed for rapid early strength gain are available, but PNS is also worth testing where units need to be demoulded on schedule during winter.<\/p>\n<h2>Is PNS cheaper than PCE?<\/h2>\n<p>The price per kilogram of admixture does not tell you what it will cost per cubic metre of concrete, or what performance you will get. Compare the cost of achieving your target: the admixture dose per m\u00b3 needed to deliver the required flow and strength at demoulding.<\/p>\n<p>If your production process does not need prolonged workability retention or a very low water\u2013cement ratio, the extra performance of PCE may not translate into an economic benefit.<\/p>\n<p>For its Spolostan superplasticizers, Enaspol reports strength increases of 15\u201350% through reduced mixing water, or cement savings of 5\u201320% while maintaining strength.<\/p>\n<h3>Spolostan superplasticizers<\/h3>\n<p>We have manufactured <a href=\"https:\/\/www.enaspol.com\/en\/product-category\/concrete-superplasticizers\/\">Spolostan superplasticizers<\/a> in Velv\u011bty since 1970. They are available as powders and liquids:<\/p>\n<ul>\n<li><strong>Spolostan 7G:<\/strong> low-dust powder, sodium salt,<\/li>\n<li><strong>Spolostan 7G Ca:<\/strong> low-dust powder, sodium salt with reduced sodium sulfate content,<\/li>\n<li><strong>Spolostan 7G CaS:<\/strong> low-dust powder, calcium salt,<\/li>\n<li><strong>Spolostan 7L Ca:<\/strong> liquid, sodium salt with reduced sodium sulfate content,<\/li>\n<li><strong>Spolostan 7L CaS:<\/strong> liquid, calcium salt,<\/li>\n<li><strong>Spolostan 7LW:<\/strong> liquid, sodium salt.<\/li>\n<\/ul>\n<p>The reduced-sodium-sulfate grades contain no more than 1\u20132% sodium sulfate by mass, depending on the grade. Check the current technical data sheets for specifications.<\/p>\n<h2>How should you compare PNS and PCE in your own plant?<\/h2>\n<p>Use the same mix design and mixing conditions for both admixtures. Measure:<\/p>\n<ol>\n<li><strong>Flow:<\/strong> immediately after mixing and again when the concrete is placed in the mould.<\/li>\n<li><strong>Strength after one and three days<\/strong>, and at the planned demoulding time if different.<\/li>\n<li><strong>Surface finish<\/strong> of the finished unit.<\/li>\n<li><strong>Admixture cost per m\u00b3<\/strong> of concrete.<\/li>\n<\/ol>\n<p>Results apply to the cement, aggregates and production conditions tested. Repeat the trial if these change.<\/p>\n<p>PCE is a powerful option for specialist concretes and longer delivery times. But if consistent production, timely demoulding and cost per m\u00b3 are your priorities, PNS remains a credible option worth testing.<\/p>\n<p>Considering PNS for your precast plant, or thinking of switching back? <a href=\"https:\/\/www.enaspol.com\/en\/contacts\/\">Contact Enaspol\u2019s specialists<\/a>. We can send you a Spolostan sample and help you set up a comparative trial using your own mix design.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Newer doesn\u2019t automatically mean better. When PNS or PCE suits precast production, and how to compare both admixtures using your own mix design.<\/p>\n","protected":false},"author":13,"featured_media":3174,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[326],"tags":[],"class_list":["post-3170","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-posts"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.4 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>PNS or PCE? How to choose a superplasticizer for precast concrete production<\/title>\n<meta name=\"description\" content=\"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"PNS or PCE? How to choose a superplasticizer for precast concrete production\" \/>\n<meta property=\"og:description\" content=\"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/\" \/>\n<meta property=\"og:site_name\" content=\"ENASPOL a.s.\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/enaspol\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-05T10:13:39+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-12T19:05:38+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1232\" \/>\n\t<meta property=\"og:image:height\" content=\"693\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Barbora \u017dalsk\u00e1\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Barbora \u017dalsk\u00e1\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/\"},\"author\":{\"name\":\"Barbora \u017dalsk\u00e1\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#\\\/schema\\\/person\\\/ca11cc8e09f82655f96f0848fd9412d6\"},\"headline\":\"PNS or PCE? How to choose a superplasticizer for precast concrete production\",\"datePublished\":\"2026-11-05T10:13:39+00:00\",\"dateModified\":\"2026-11-12T19:05:38+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/\"},\"wordCount\":738,\"publisher\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg\",\"articleSection\":[\"Posts\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/\",\"name\":\"PNS or PCE? How to choose a superplasticizer for precast concrete production\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg\",\"datePublished\":\"2026-11-05T10:13:39+00:00\",\"dateModified\":\"2026-11-12T19:05:38+00:00\",\"description\":\"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg\",\"contentUrl\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg\",\"width\":1232,\"height\":693},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Dom\u016f\",\"item\":\"https:\\\/\\\/www.enaspol.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"PNS or PCE? How to choose a superplasticizer for precast concrete production\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#website\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/\",\"name\":\"ENASPOL a.s.\",\"description\":\"V\u00fdrobce povrchov\u011b aktivn\u00edch l\u00e1tek (tenzid\u016f) a pomocn\u00fdch p\u0159\u00edpravk\u016f pro r\u016fzn\u00e1 pr\u016fmyslov\u00e1 odv\u011btv\u00ed.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.enaspol.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#organization\",\"name\":\"ENASPOL a.s.\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/enaspol_LOGO.svg\",\"contentUrl\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2025\\\/10\\\/enaspol_LOGO.svg\",\"caption\":\"ENASPOL a.s.\"},\"image\":{\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/enaspol\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/enaspol\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/#\\\/schema\\\/person\\\/ca11cc8e09f82655f96f0848fd9412d6\",\"name\":\"Barbora \u017dalsk\u00e1\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/autor-barbora-author_4_1774086666-100x100.jpeg\",\"url\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/autor-barbora-author_4_1774086666-100x100.jpeg\",\"contentUrl\":\"https:\\\/\\\/www.enaspol.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/autor-barbora-author_4_1774086666-100x100.jpeg\",\"caption\":\"Barbora \u017dalsk\u00e1\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"PNS or PCE? How to choose a superplasticizer for precast concrete production","description":"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/","og_locale":"en_US","og_type":"article","og_title":"PNS or PCE? How to choose a superplasticizer for precast concrete production","og_description":"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.","og_url":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/","og_site_name":"ENASPOL a.s.","article_publisher":"https:\/\/www.facebook.com\/enaspol","article_published_time":"2026-11-05T10:13:39+00:00","article_modified_time":"2026-11-12T19:05:38+00:00","og_image":[{"width":1232,"height":693,"url":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg","type":"image\/jpeg"}],"author":"Barbora \u017dalsk\u00e1","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Barbora \u017dalsk\u00e1","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#article","isPartOf":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/"},"author":{"name":"Barbora \u017dalsk\u00e1","@id":"https:\/\/www.enaspol.com\/#\/schema\/person\/ca11cc8e09f82655f96f0848fd9412d6"},"headline":"PNS or PCE? How to choose a superplasticizer for precast concrete production","datePublished":"2026-11-05T10:13:39+00:00","dateModified":"2026-11-12T19:05:38+00:00","mainEntityOfPage":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/"},"wordCount":738,"publisher":{"@id":"https:\/\/www.enaspol.com\/#organization"},"image":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#primaryimage"},"thumbnailUrl":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg","articleSection":["Posts"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/","url":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/","name":"PNS or PCE? How to choose a superplasticizer for precast concrete production","isPartOf":{"@id":"https:\/\/www.enaspol.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#primaryimage"},"image":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#primaryimage"},"thumbnailUrl":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg","datePublished":"2026-11-05T10:13:39+00:00","dateModified":"2026-11-12T19:05:38+00:00","description":"Compare PNS and PCE superplasticisers for precast concrete. Find out how raw materials, workability and demoulding needs affect your choice.","breadcrumb":{"@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#primaryimage","url":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg","contentUrl":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/11\/pns-oder-pce-so-wahlen-sie-ein-betonfliesmittel-fur-die-herstellung-von-betonfer.jpg","width":1232,"height":693},{"@type":"BreadcrumbList","@id":"https:\/\/www.enaspol.com\/en\/pns-or-pce-how-to-choose-a-superplasticizer-for-precast-concrete-production\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Dom\u016f","item":"https:\/\/www.enaspol.com\/en\/"},{"@type":"ListItem","position":2,"name":"PNS or PCE? How to choose a superplasticizer for precast concrete production"}]},{"@type":"WebSite","@id":"https:\/\/www.enaspol.com\/#website","url":"https:\/\/www.enaspol.com\/","name":"ENASPOL a.s.","description":"V\u00fdrobce povrchov\u011b aktivn\u00edch l\u00e1tek (tenzid\u016f) a pomocn\u00fdch p\u0159\u00edpravk\u016f pro r\u016fzn\u00e1 pr\u016fmyslov\u00e1 odv\u011btv\u00ed.","publisher":{"@id":"https:\/\/www.enaspol.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.enaspol.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.enaspol.com\/#organization","name":"ENASPOL a.s.","url":"https:\/\/www.enaspol.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.enaspol.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2025\/10\/enaspol_LOGO.svg","contentUrl":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2025\/10\/enaspol_LOGO.svg","caption":"ENASPOL a.s."},"image":{"@id":"https:\/\/www.enaspol.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/enaspol","https:\/\/www.linkedin.com\/company\/enaspol\/"]},{"@type":"Person","@id":"https:\/\/www.enaspol.com\/#\/schema\/person\/ca11cc8e09f82655f96f0848fd9412d6","name":"Barbora \u017dalsk\u00e1","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/10\/autor-barbora-author_4_1774086666-100x100.jpeg","url":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/10\/autor-barbora-author_4_1774086666-100x100.jpeg","contentUrl":"https:\/\/www.enaspol.com\/wp-content\/uploads\/2026\/10\/autor-barbora-author_4_1774086666-100x100.jpeg","caption":"Barbora \u017dalsk\u00e1"}}]}},"_links":{"self":[{"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/posts\/3170","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/users\/13"}],"replies":[{"embeddable":true,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/comments?post=3170"}],"version-history":[{"count":4,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/posts\/3170\/revisions"}],"predecessor-version":[{"id":3319,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/posts\/3170\/revisions\/3319"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/media\/3174"}],"wp:attachment":[{"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/media?parent=3170"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/categories?post=3170"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.enaspol.com\/en\/wp-json\/wp\/v2\/tags?post=3170"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}